fbpx

Everest – Oxygen

$3,490.00

Clear
SKU: N/A Category:

Description

Training & Progression
The OXYGEN is a versatile wing for both free flying and powered flight. It is suitable for students in training but also ideal for new pilots. It is a perfect glider for pilots who appreciate an easy, safe and solid wing for the first chapter of their paramotor experience.

High Passive Safety
It satisfies the vast majority of power flight pilots who search for safety, ease of operation and docile flight characteristics. The wing offers simplicity in flight while providing a high level of passive safety. This glider is very efficient offering low fuel consumption during cross-country flights.

Light and Easy to Launch
Like the whole range of Everest gliders, the OXYGEN is mainly produced with 29 gr/m² fabric on top and bottom surface. The result is an extremely easy inflation behavior, especially in nil wind conditions.

CHARACTERISTICS

TAKE-OFF – Extremely easy take-off ability in zero wind conditions.
VERSATILITY – Versatile wing for both powered flights and free flying with very low fuel consumption.
LANDING – Great flare authority allowing very soft landings.
SIMPLE RISERS – Easy setting up, with simple risers equipped with trimmers.

TECHNICAL SPECIFICATIONS
THE OXYGEN PRESENTS:
  • 39 cells, 6 of them closed
  • Use of 29 gr/m² Nylon 6.6 light fabric on top and bottom surface of the canopy for a super easy inflation
  • Mini-Ribs (Profiles between the cells of the trailing edge, which improve performance and handling)
  • Flexible nylon battens reinforcements
  • Advanced air foil design to boost and keep stable internal pressure
  • Trimmers for acceleration
  • Split A risers
S
M
L
Flat area (m²) 22,9 26,5 28,3
Cells 39 39 39
Flat Aspect Ratio 5,01 5,01 5,01
Projected Aspect Ratio 4,23 4,23 4,23
Glider weight 4,5 5 5,5
Recommended pilot weight (kg) 65-80 80-100 100-120
Certification EN 926-1 EN 926-1 EN 926-1
Registration DGAC
Pending
DGAC
Pending
DGAC
Pending
MATERIALS SPECIFICATIONS

Leading edge fabric: 40 gr/m² – 30D Nylon 6.6 high tenacity with PU+Silicone​ coating​

Top/Bottom fabrics: 29 gr/m² – 20D Nylon 6.6 high tenacity with PU+Silicone​ coating

Profiles: Pro-Nyl 36 gr/m²  High Tenacity Nylon Rip-Stop hard finish

Reinforcements:  2,5 mm Nylon Maxfio Meada

Lines:
Liros® Dyneema 0,76 mm – 45,0 daN
Liros® Dyneema 1,05 mm – 121,4 daN
Liros® Dyneema 1,20 mm – 142,9 daN
Liros® Dyneema 1,58 mm – 182,3 daN

Risers: Polyester 15mm 1600kg

Pulleys: Nylon 12 mm / ISR 16 mm ball bearing

Additional information

Color

Yellow, Red, Blue

Size

S, M, L

TOP